Toshiba Satellite M100 (PSMA1) - Manual (Page 69)

User’s Manual 4-9
Operating Basics
Wireless communication switch
You can enable or disable the wireless LAN function with the on/off switch.
No transmissions are sent or received when the switch is off. Slide the
switch to the right to turn it on and to the left to turn it off.
Wireless communication LED
The LED indicates the status of the wireless communication functions.
Using optical disc drives
The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical disc drives. The full-size drive provides
high-performance execution of disc-based programs. You can run either
12 cm (4.72") or 8 cm (3.15") discs without an adapter. An ATAPI interface
controller is used for disc drive operation. When the computer is accessing
a disc, an indicator on the drive illuminates.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on
CD-RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs.
If you have a DVD-ROM, you cannot write to CDs.
Turn the switch off in airplanes and hospitals. Check the LED, it stops
glowing when the wireless communication function is off.
LED status Indication
LED off Wireless communication switch is set to off.
LED glows Wireless communication switch is on.
Use the WinDVD application to view DVD-Video discs.