Toshiba LT170 - Manual (Page 62)

Inserting a memory media
The following instructions apply to all types of supported media devices. To
insert a memory media, follow the steps as detailed below:
1.
Turn the memory media so that the contacts (metal areas) are facing
down.
2. Open the slot cover and insert the memory media into the memory
media slot on the tablet.
3. Push the memory media gently to ensure a firm connection is made.
4. Close the slot cover into place.
Figure 7-1 Inserting a memory media
1
2 3
1. Memory media slot 2. Memory media
3. Slot cover
Make sure memory media is oriented properly before you insert it. If
you insert the media in wrong direction, you may not be able to
remove it.
When inserting memory media, do not touch the metal contacts. You
could expose the storage area to static electricity, which can destroy
data.
Do not turn the tablet off or switch to Sleep Mode while files are being
copied - doing so may cause data loss
Removing a memory media
The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
1.
Make sure all file operations are finished.
2. Tap Apps -> Settings -> Storage -> Unmount EXTSD card.
3. Push the memory media until you hear a click to partially release it.
4. Grasp it and pull it out of the slot.
Do not remove the memory media while the tablet is in Sleep mode. The
tablet could become unstable or data in the memory media could be lost.
TOSHIBA LT170
User's Manual 7-3