Toshiba LT170 - Manual (Page 31)

To connect to a computer:
1.
Plug the Micro USB connector of a USB cable into the Micro USB port
on this tablet.
Figure 4-2 Connecting an USB cable
2
1
1. Micro USB port 2. Micro USB connector
2. Plug the other end of the USB cable into the USB port on the
computer.
3. Tap the "USB connected" notification in the notifications panel and
then tap the "Turn on USB storage" button.
Your tablet will be recognized as a removable USB mass storage device
and you can access its content from the computer.
To remove this tablet from the computer:
1.
Make sure all file operations are finished.
2. Tap the "Turn off USB storage" notification in the notifications panel
and then tap the "Turn off USB storage" button.
3. Unplug the tablet from your computer.
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
Factory Reset
The tablet provides you with the function to reset it. Before executing this
function, you need to backup the system settings, application settings, user
installed applications and data in the internal storage.
To perform the factory data reset, please follow the steps below:
1.
Tap Settings -> Privacy -> Factory data reset -> Reset device ->
Erase everything .
2. The factory data reset will be done.
Please note that the following data will be erased:
System settings and application settings
User installed applications
Internal storage files, such as music or photos
TOSHIBA LT170
User's Manual 4-7