Toshiba Satellite Pro S750 User Manual

Page 80

User’s Manual

3-23

Hardware, Utilities and Options

Installing a memory module

To install a memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to

section in Chapter 1, Getting Started if

required).

2. Remove the AC adaptor and all cables and peripherals connected to

the computer.

3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to

section in Chapter 6, Power and Power-Up

Modes, if required).

5. Loosen the screw securing the memory module cover in place - please

note that this screw is attached to the cover in order to prevent it from

being lost.

6. Slide your fingernail or a thin object under the cover and lift it off.

Figure 3-8 Removing the memory module cover

Use a point size 0 Phillips screwdriver.

1. Memory module cover

2. Screw