Using optical disc drives, Using optical disc drives -2, Loading discs – Toshiba Satellite Pro L300 User Manual
Page 60
4-2
User’s Manual
L300/L300D series
Using optical disc drives
Operation is the same for all other optical disc drives. The full-size drive
provides high-performance execution of CD/DVDs-based programs. You
can run CD/DVDs without an adaptor. When the computer is accessing a
CD/DVDs, an indicator on the drive glows.
If you have a DVD Super Multi drive, refer also to the
on DVD Super Multi (+-R DL) drive
section for precautions on writing to
CD/DVDs.
Loading discs
To load CD/DVDs, follow the steps below and refer to figures.
1. a. When the power is on, press the eject button to open the drawer
slightly.
Figure 4-1 Pressing the eject button
b. Pressing the eject button will not open the drawer when the drive’s
power is off. If the power is off, you can open the drawer by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole just to the right of the eject button.
Figure 4-2 Manual release with the eject hole
Use the TOSHIBA DVD PLAYER application to view DVD-Video
discs.(DVD Super Multi (+-R DL) drive model)
Eject button
Eject hole
Diameter 1.0 mm
15 mm