beautypg.com

Connecting an hdmi, Or dvi device to the hdmi input – Toshiba SV685 User Manual

Page 9

background image

9

CONNECTING YOUR TV

Connecting an HDMI

or DVI

device to the HDMI input

The HDMI input on your television receives digital

audio and uncompressed digital video from an

HDMI source device or uncompressed digital

video from a DVI (Digital Visual Interface) source

device.

This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant

[1]

consumer

electronic devices (such as a set-top box or DVD player with
HDMI or DVI output). For acceptable video signal formats,
see page 61.

NOTE:
• Some early HDMI equipment may not work properly with

your latest HDMI TV, due to the adoption of a new
standard. Please unplug your HDMI cable first and then try
setting the following options (Lip Sync, INSTAPORT™) to
Off”. Your early HDMI source should operate properly
with your television. See page 50.

• Supported Audio format: Linear PCM, sampling rate 32/

44.1/48kHz.

Connect an HDMI cable (type A connector) to the HDMI
terminal.

For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (

).

• If your HDMI connection is capable of 1080p and/or your

television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI
cable may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• See “HDMI 1 Audio” on page 50.

The HDMI 4 terminal is located on the side of the television.

To view the HDMI device video, press the

o

button to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

Connect an HDMI-to-DVI adapter cable (HDMI type A
connector) to the HDMI 1 terminal and audio cables to the
PC/HDMI1 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adapter cable length is

6.6 ft (2m).

• An HDMI-to-DVI adapter cable transfers video only.

Separate analogue audio cables are required.

• See “HDMI 1 Audio” on page 50.

NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the

television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device first, and then the television.

To connect an HDMI device

HDMI

OUT

VIDEO AUDIO

L

R

R

L

OUT

IN

HDMI cable

HDMI device

To connect a DVI device

DVI /HDCP

OUT

VIDEO AUDIO

L

R

R

L

OUT

IN

HDMI-to- DVI
adapter Cable

Audio cable for HDMI

to television connection

(not supplied)

DVI device

[1] EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital content
protection, which is being standardized for reception of high-definition
video signals. Because this is an evolving technology, it is possible that
some devices may not operate properly with the television.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.