Toshiba Satellite M70 (PSM71) User Manual
Page 62
3-10
User’s Manual
Getting Started
Benefits of standby
The standby feature provides the following benefits:
■
Restores the previous working environment more rapidly than
Hibernation Mode.
■
Saves power by shutting down the system when the computer receives
no input or hardware access for the duration set by the System Standby
feature.
■
You can use the panel power off feature.
Enabling Standby
You can enter standby mode in one of three ways:
1. Click Start, then Turn Off Computer and then Stand By.
2. Close the display panel. This feature must be enabled. Refer to the
Setup Action tab in TOSHIBA Power Saver Utility described in the
Control Panel.
3. Press the power button. This feature must be enabled. Refer to the
Setup Action tab in TOSHIBA Power Saver Utility described in the
Control Panel.
When you turn the power back on, you can continue where you left when
you shut down the computer.
Standby limitations
Standby will not function under the following conditions:
■
Power is turned back on immediately after shutting down.
■
Memory circuits are exposed to static electricity or electrical noise.
You can also enable Standby by pressing Fn + F3. See Chapter 5,
, for details.
■
When the computer is shut down in standby mode, the power indicator
glows amber.
■
If you are running the computer on battery power, you can lengthen the
operating time by shutting down into Hibernation Mode. Standby Mode
consumes more power from the battery when the computer is switched
off.