Using optical disc drives, Using optical disc drives -7, Loading discs – Toshiba Satellite L750D User Manual
Page 77
User’s Manual
4-7
Operating Basics
Using optical disc drives
The full-size drive provides high-performance execution of CD/DVD/Blu-ray
Disc™-based programs. You can run either 12 cm (4.72") or 8 cm (3.15")
CD/DVD/Blu-ray™ discs without an adaptor. A Serial ATA interface
controller is used for CD/DVD/Blu-ray Disc™ operation. When the
computer is accessing a CD/DVD/Blu-ray Disc™, an indicator on the drive
glows.
For precautions on writing to CD/DVD/Blu-ray™ discs, refer to the
section.
Loading discs
To load a disc, follow the steps as detailed below:
1. When the computer’s power is on, press the eject button to open
the disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
Pressing the eject button and pulling the disc tray open
3. Lay the disc, label side up, in the disc tray.
Use the DVD playback application to view DVD-Video discs.
1. Disc tray
2. Eject button
1
2