Toshiba Tecra M11 - Manual (Page 155)

User’s Manual 7-6
HW Setup
USB-FDD Legacy Emulation
Use this option to enable or disable USB floppy diskette drive legacy
emulation. If your operating system does not support USB, you can still use
a USB floppy diskette drive by setting the USB-FDD Legacy Emulation
item to Enabled.
SATA
eSATA
This feature allows you to set conditions for SATA.
SATA Interface setting
This feature allows you to set SATA interface setting.
Enabled
Enables the USB floppy diskette drive legacy
emulation function (Default).
Disabled Disables the USB floppy diskette drive legacy
emulation function.
Enabled Enables the eSATA port. (Default)
Disabled Disables the eSATA port in order to save power.
Performance
Let HDD/SSD work with maximum performance.
(Default)
Battery life
Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance
down.