Toshiba Tecra M11 - Manual (Page 146)

User’s Manual 6-9
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery lock (2)
is in its ( ) position.
Securing the battery pack
3. Turn your computer over.
TOSHIBA Password Utility
The TOSHIBA Password Utility provides two levels of password security:
User and Supervisor.
User Password
To start the utility, point to or click the following items:
Start All Programs TOSHIBA Utilities Password Utility
User authentication may be required to validate user rights when using
"TOSHIBA Password Utility" to delete or change passwords, etc.
User Password field
■ Set (button)
Click this button to register a password of up to 50 characters. After a
password is set, you will be prompted to enter it when you start the
computer. Check "Set the same string simultaneously as the HDD User
Password" when setting the HDD User Password.
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Battery pack 2. Battery lock
1
2
Passwords set by the TOSHIBA Password Utility function are different
from the Windows password.