Toshiba Satellite T230 - Manual (Page 67)

User’s Manual 3-23
T210/T230
Figure 3-11 Removing the memory module (T230)
9. Seat the memory module cover in place and secure it with the screw.
10. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes , if required.
11. Turn your computer over.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port.
Figure 3-12 Connecting the monitor cable to the external monitor port (T210)
3. Turn the external monitor’s power on.
4. Turn the computer’s power on.
1
1
2
1
1. Latches
Take care to ensure that the memory module cover is firmly closed.
1
2
1. External monitor port
2. Monitor cable