Common interface, Stored cicam pin, Software upgrade and licences – Toshiba L7463 User Manual
Page 81: Searching for new software, Network upgrade, Common interface stored cicam pin, Searching for new software network upgrade
81
Engl
ish
CONTROLS AND FEATURES
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information, see a service
provider.
a
Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM has been inserted.
b
Press
and
B
/
b
to highlight
Installation
icon.
c
Press
c
and
B
/
b
to select
DTV Settings
and
press
OK
.
d
Press
B
/
b
to select
Common Interface
and
press
OK
.
e
Details of the CAM should now be available.
NOTE:
• Software update of a CI Plus CAM may execute
automatically if it is instigated by the broadcaster. This
could cause the cancellation of any Reminders/
Recordings during this process.
• Some CI or CI+ CAM may not be supported.
Stored the CICAM PIN is used for recording.
a
Press
and
B
/
b
to highlight
Installation
icon.
b
Press
c
and
B
/
b
to select
DTV Settings
and
press
OK
.
c
Press
B
/
b
to
select Stored CICAM PIN
and
press
OK
.
d
Input PIN code on the Stored CICAM PIN dialog
window and press
Done
.
NOTE:
Note relating to cards for which the
CAM PIN
can
be changed through the Common Interface: If you change
the PIN through the Common Interface after setting the
stored PIN, it invalidates the stored PIN, which you must
change in a separate operation.
Software Upgrade and
Licences
If preferred, software upgrades can be searched for
manually using
Search for New Software
.
a
In the
Get Help
menu, press
B
/
b
to select
Software Upgrade
and press
OK
.
b
Press
B
/
b
to select
Over-the-air Upgrade
and
press
OK
.
c
Press
B
/
b
to select
Auto Upgrade
and press
c
to select
On
, then press
B
/
b
to select
Search
for new Software
and press
OK
.
If an upgrade is found, a message will be displayed
to decide downloading the new software or not. If
not, a screen will appear stating that an upgrade is
unavailable.
d
After searching software, message will be
displayed and press
C
/
c
to select Yes or No. If
you select No, then TV will be power off once the
Software update has completed.
NOTE:
When
Auto Upgrade
is set to
Off
, this feature is
not available.
TOSHIBA may offer upgrades for the TV’s software in the
future. The TV’s software is upgraded via the Network.
Before downloading software:
Configure your TV to connect to the Internet.
NOTE:
While the upgrade is being performed, you will not
be able to watch the TV.
a
In the
Get Help
menu, press
B
/
b
to select
Software Upgrade
and press
OK
.
b
Press
B
/
b
to select
Network Upgrade
and press
OK
.
NOTE:
If the network is not available, a warning
message will appear.
c
The TV software upgrade will start when download
succeeds.
Common Interface
Stored CICAM PIN
Searching for New Software
Network Upgrade
Searching for a new software upgrade for this TV.
4 %
CH 855
SEARCH FOR NEW SOFTWARE