Toshiba L7463 - Manual (Page 102)

102
En
g
lis
h
INFORMATION
• For optimal 3D effect and to avoid eye fatigue it is
important that you properly select your viewing
position.
The best viewing position is at the indicated viewing
distance with your eyes at the same level as the center of
the display as shown below. The center of the optimum
viewing area varies from set to set. The usable viewing
area is generally over the range shown in the table below
(actual angle not depicted in drawing).
IMPORTANT: If you see a double image, your eyes are
either too high or too low in relation to the horizontal center
of the screen.
Adjust your position so that it is closer to the center to
avoid eye fatigue and to enjoy optimum 3D effects.
• Watching TV while sitting too close to the screen for
an extended period of time may cause eye strain.
The ideal viewing distance should be at least three times
the screen height.
• Switching left and right images
The left and right eye shutter timing of the glasses can be
swapped. If 3D images look blurred, switch the left and
right sides of the 3D image.
Notes on watching the TV
• 3D effect and image quality may vary depending upon
content quality and display device capability/
functionality/settings.
• If you use any device, such as a mobile phone or
mobile wireless device, near the 3D glasses, the 3D
glasses may not work correctly.
• Use the product in the following temperature range;
otherwise, the quality of the 3D image or the reliability
of the product cannot be guaranteed.
– 3D glasses: 0 °C - 40 °C (32 °F - 104 °F)
– TV: 0 °C - 35 °C (32 °F - 95 °F)
• If you use a fluorescent light, it may flicker depending
on the frequency of the light. In this case, reduce the
brightness of the fluorescent light, or use another
light. (It is not recommended to watch the TV in a dark
room, especially for children.)
• Wear the 3D glasses properly, otherwise you may not
see the correct 3D image.
• When not viewing 3D images on this unit, take off the
3D glasses; otherwise, it may be difficult to see the
display on other products such as PC, digital clock or
calculator, etc.
• The 2D to 3D conversion function is activated and
controlled by you according to your personal
preferences.
• The 2D to 3D conversion function is meant for
enjoyment of 2D home video, and other 2D content you
create, in 3D according to your personal preferences.
• The 2D to 3D conversion function is not intended for
use with pre-recorded 2D copyrighted content owned
by a third-party unless the copyright owner has given
direct or indirect permission, or unless applicable law
permits such use.
About the connecting cable
• Use a high-speed and high-quality HDMI cable when
you connect a device such as 3D compatible BD player
or PC to the TV. When you use a standard HDMI cable,
3D images may not be shown.
Viewing Angle Viewing Distance
42M74**/
L74**
Approx. 26 deg. Over 1.6 m
47M74**/
L74**
Approx. 26 deg. Over 1.8 m
55M74**/
L74**
Approx. 26 deg. Over 2.1 m
Center of Display
Viewing
Angle
Same height as
Center of Display
Viewing Distance
If the 3D PIN number has been forgotten:
Use the Master PIN code of 1276, and then change to a
number of your choice. Select
3D PIN from the
Preferences / 3D Setup menu to enter PIN.