beautypg.com

Diagnostic mode, Beep volume – Toshiba Satellite Pro A120 (PSAC0) User Manual

Page 128

background image

7-12

User’s Manual

HW Setup

3. The TPM setting changes from being displayed as Enable to Disabled,

and the setting is no longer displayed.

Diagnostic Mode

Set whether the BIOS Setup Diagnostic test is enabled.

Beep Volume

Set the volume to High, Medium, Low or Off.

System configuration changes other than changes to this setting

should be made in Windows using TOSHIBA HW Setup, TOSHIBA

Password Utility, TOSHIBA Power Saver, Device Manager, etc.

When using TPM, please install the Infineon TPM Installation Guide

from the TOSHIBA Application Installer.

Please ensure that the user reads the Infineon TPM Installation

Guide as it contains usage information and notes on using TPM.

Disabled

(Default)

The Diagnostic test is disabled.

Enabled

The Diagnostic test is enabled.

High

Sets the beep volume to high.

Medium (Default)

Sets the beep volume to high.medium.

Low

Sets the beep volume to high.low.

Off

Mutes the beep volume.

This manual is related to the following products: