Specifications – Bogen WV100 User Manual
Page 13
Specifications
11
Power Output (RMS):
WV100: 100W (140W Typical, @1 kHz/0.1%/4
Ω)
WV150: 150W (200W Typical, @1 kHz/0.1%/4
Ω)
WV250: 250W (340W Typical, @1 kHz/0.1%/4
Ω)
Frequency Response
Transformer:
45-20 kHz; 0/-2 dB @ FRP
Direct:
20-20 kHz; 0/-1 dB @ FRP
Distortion
Transformer:
0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
Direct:
0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
Signal-to-Noise
Fundamental:
-94 dB*
With Aux Module:
-70 dB*
With Mic Module:
-60 dB*
With Tel Module:
-70 dB*
Tone Controls
Bass Frequency:
1
00 Hz (+/- 10 dB minimum)
Treble Frequency:
1
0 kHz (+/- 10 dB minimum)
Low Cut Frequency:
1
25 Hz @ -6 dB/octave
Sensitivity:
0.4V (at backplane connector)
Output Regulation:
2 dB or better no load to full load
Output Impedance
Transformer-Coupled:
70V, 25V, 8 ohms; balanced or unbalanced
Direct Coupled:
4 ohms unbalanced
Tape Out
Output Level:
4 VRMS @ FRP
Output Impedance:
50 ohms maximum
Protection:
Thermal, short-circuit, and overload (auto reset)
Line Fusing:
Resettable circuit breaker
Cooling:
Thermally controlled 3-speed fan
Power Consumption:
WV100:
2.0A @ 120V AC, 60 Hz
WV150:
3.5A @ 120V AC, 60 Hz
WV250:
5.5A @ 120V AC, 60 Hz
Dimensions:
WV (all models):
1
4-1/8" W x 21" H
BBF:
1
4-1/2" W x 24-3/4" H x 3-7/8" D
BBS:
1
6-1/4" W x 26-3/4" H x 3-7/8" D
WMAD:
1
6-1/4" W x 26-3/4" H x 1" D
Product Weight:
WV100:
27 lb.
WV150:
29 lb.
WV250:
28 lb.
BBF:
1
4 lb.
BBS:
1
8 lb.
WMAD:
11
lb.
* Referenced to full-rated power (FRP) output level, 20-20 kHz bandwidth limited.
All specifications subject to change without notice.