Ip configuration, User name and password – B&B Electronics EIR608 Series User Manual
Page 2
EIR608 Series-5107qsg
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104
www.bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445
www.bb-europe
.com [email protected] [email protected]
IP Configuration
User Name and Password
7
6
o
Expand the “system tree” and select IP configuration.
o
Enter the IP Address, Subnet Mask, and Gateway
provided by your Network Administrator.
o
Save the changes.
o
Disconnect the stand alone PC from the switch and
connect the switch to the network.
o
Inform your Network Administrator that the IP Address
has been changed.
o
NOTE: The User Manual contains instructions for
assigning the IP Address from a DHCP Server and
to allow the switch to act as a DHCP Server.
o
This step should be accomplished by the Network
Administrator.
o
Log onto the switch from a PC connected to the
network.
o
Expand the “System Tree” and select user
authentication..
o
Enter the new User Name and Password. Record this
information in the space provided below. File this
document for future reference.
o
Click the Apply button.
USER NAME: ______________________________________
PASSWORD:_______________________________________
MAC ADDRESS: ____________________________________
IP ADDRESS: _______________________________________
Basic Configuration is complete. A
comprehensive Manual is contained on the CD
ROM. Refer to this manual to configure the
advanced features of this switch.