Pioneer AVIC-F9220BT - Manual (Page 54)

5 Wait until your Bluetooth device ap-
pears in the list.
p If you cannot find the Bluetooth device that
you want to connect, check that the device
is waiting for the Bluetooth wireless tech-
nology connection.
6 Touch the Bluetooth device name you
want to register.
# Touch [Search Again].
The system searches for devices featuring Blue-
tooth technology that are waiting for the connec-
tion and displays them in the list if a device is
found.
7 Enter the PIN code (the default PIN
code is
“1111”) using the Bluetooth device.
Enter the PIN code while the message
“Please
follow the instructions on your mobile
phone.
” appears.
The device is registered in the navigation sys-
tem.
After the device is successfully registered, the
Bluetooth connection is established from the
navigation system.
Pairing from your Bluetooth
devices
You can register the Bluetooth device by set-
ting the navigation system to standby mode
and requesting connection from the Bluetooth
device.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the
“Settings Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 20.
3 Touch [Bluetooth Settings].
The
“Bluetooth Settings” screen appears.
4 Touch [Registration].
The
“Nearby Device List” screen appears.
5 Touch [Register from mobile phone].
The navigation system waits for a Bluetooth
wireless technology connection.
Engb
54
Chapter
11 Registering and connecting a Bluetooth device