Pioneer AVIC-F9220BT - Manual (Page 142)

4 Touch [+] or [ –] to adjust the values for
Red, Green and Blue to create a favourite
colour.
Watch the illumination of hardware keys while
adjusting the colour.
Each time you touch [
+] or [ –] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
p An entry cannot be stored with all of the va-
lues set to
“+00”.
5 Touch [Memory 1] or [Memory 2] to
store the illumination colour.
6 Touch [OK] to return to the previous
screen.
Checking the version information
1 Display the
“System Settings” screen.
= For details, refer to Displaying the “System
Settings
” screen on page 136.
2 Touch [Service Information].
The
“Service Information Screen” screen ap-
pears.
3 Check the version information.
Selecting the video for
“Rear display”
You can choose either to show the same
image as the front screen or to show the se-
lected source on the
“Rear display”.
% Tap
on the left edge of the screen.
p The appearance of this key changes accord-
ing to the current setting.
Each touch of changes the settings as fol-
lows:
! Mirror AV: The video on the front screen of
the navigation unit is output to the
“Rear
display
”
! DISC: The video and sound of the DVDs are
output to the
“Rear display”
! iPod: The video and sound of the iPod are
output to the
“Rear display”
! AV1: The video and sound of AV1 are out-
put to the
“Rear display”
! AV2: The video and sound of AV2 are out-
put to the
“Rear display”
p When “Mirror AV” is selected, the following
restrictions are applied to
“Rear display”.
— When selecting “Rear View” in the map
display, nothing is displayed.
— All sounds cannot be output for “Rear
display
”.
— When playing back video files on the ex-
ternal storage device (USB, SD), the
video image is not output.
p When “DISC” is selected, the following re-
striction is applied to
“Rear display”.
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, only the
sound is output.
p When “iPod” is selected, the following re-
striction is applied to
“Rear display”.
— The video image and sound are output
only when the appropriate setting on
“AV1 Input” is “iPod”.
p When “AV” is selected, the following re-
strictions are applied to
“Rear display”.
— The video image and sound are output
only when AV1/AV2 has both video and
sound.
— The video image and sound are output
only when the appropriate setting on
“AV1 Input” or “AV2 Input” are
“Video”.
Engb
142
Chapter
27 Customising preferences