Pioneer AVIC-F9220BT - Manual (Page 16)

Ejecting an SD memory card
(for AVIC-F20BT)
p This section describes operations for AVIC-
F20BT.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch [Eject SD].
The LCD panel opens.
p Touch [Yes] if the message indicating that
the flap opens after the navigation system
restarts appears.
The navigation system restarts, and then the
LCD panel opens.
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
5 Press the h button.
The LCD panel closes.
p If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.
p When you eject the SD memory card by
touching [ Eject SD], the model information
that you are using will be automatically
stored into the SD memory card.
The utility programme navgate FEEDS will
use this information to recognise the model
that you use.
Inserting an SD memory card
(for AVIC-F920BT, AVIC-F9210BT
and AVIC-F9220BT)
p This section describes operations for AVIC-
F920BT, AVIC-F9210BT, and AVIC-F9220BT.
% Insert an SD memory card into the SD
card slot.
Insert the SD memory card with the terminal
contacts facing down, and press the card until
it clicks and locks completely.
p If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.
Engb
16
Chapter
02 Basic operation