Adjusting 3-band parametric equalizer, Available accessories – Pioneer AVH-P5900DVD User Manual

Page 81

Adjusting 3-band parametric equalizer

For

CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the front, rear and cen-
ter equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.
! A separate CUSTOM1 curve can be cre-

ated for each source.

! A CUSTOM2 curve can be created com-

mon to all sources.

! The center speaker largely determines the

sound image and getting the balance right
isn

’t easy. We recommend reproducing a 2-

ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.

Touch NEXT twice on the DSP function

menu.

Touch PARAMETRIC EQ.

Touch a or b to select the desired item.

Each time you touch a or b selects the item
in the following order:
EQ (equalizer)

—SP-SELECT (speakers)—

BAND (bands)

—FREQUENCY (center fre-

quency)

—LEVEL (equalizer level)—

Q. FACTOR (Q factor)

Touch d to select the equalizer.

Touch d repeatedly to switch between the fol-
lowing equalizers:
POWERFUL

—NATURAL—VOCAL—FLAT—

CUSTOM1

—CUSTOM2—SUPER BASS

Touch b and then touch c or d to se-

lect the speaker to be adjusted.
Touch c or d until the desired speaker ap-
pears in the display.

REAR (rear speakers)

—CENTER (center speak-

er)

—FRONT (front speakers)

# You cannot select speakers whose size is set
at

OFF. (Refer to Setting the speaker setting on

page 77.)

Touch b and then touch c or d to se-

lect the equalizer band to be adjusted.
Each time you touch c or d selects equalizer
bands in the following order:
LOW (low)

—MID (mid)—HIGH (high)

Touch b and then touch c or d to se-

lect the center frequency of selected band.
Touch c or d until the desired frequency ap-
pears in the display.
40Hz

—50Hz—63Hz—80Hz—100Hz—125Hz

—160Hz—200Hz—250Hz—315Hz—400Hz—
500Hz

—630Hz—800Hz—1kHz—1.25kHz—

1.6kHz

—2kHz—2.5kHz—3.15kHz—4kHz—

5kHz

—6.3kHz—8kHz—10kHz—12.5kHz

Touch b and then touch c or d to ad-

just the equalizer level.
Each time you touch c or d it increases or de-
creases the equalizer level.

+12 to

–12 is dis-

played as the level is increased or decreased.

Touch b and then touch c or d to se-

lect the desired Q factor.
Each time you touch c or d switches between
the following Q factor:
NARROW (narrow)

—WIDE (wide)

# You can adjust parameters for each band of
the other speakers in the same way.

Note

You can select a center frequency for each band.
You can change the center frequency in 1/3-oc-
tave steps, but you cannot select frequencies that
have intervals shorter than 1 octave among the
center frequencies of the three bands.

Available accessories

Section

vailable

accessories