Pioneer AVH-P5900DVD - Manual (Page 19)

Radio
Basic Operations
This unit
’s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 21).
RDS
RDS (radio data system) contains inaudible in-
formations that helps searching of the radio
stations.
! RDS service may not be provided by all sta-
tions.
! RDS functions such as AF and TA are only
active when your radio is tuned to an RDS
station.
2 2 2
7
1 1 1 3 3 3 4 4 4
9 5 6 8
1 Source icon
2 Band indicator
3 Preset number indicator
4 Program service name
5 NEWS indicator
Shows when the set news program is re-
ceived.
6 TRAFFIC indicator
Shows when a TP station is tuned in.
7 TEXT indicator
Shows when the radio text is received.
8 PTY label indicator
9 Stereo (5) indicator
Shows when the selected frequency is being
broadcast in stereo.
Non-RDS or MW/LW
2 2 2
5
1 1 1 3 3 3 4 4 4
6
1 Source icon
2 Band indicator
3 Preset number indicator
4 Frequency indicator
5 LOCAL indicator
Shows when local seek tuning is on.
6 Stereo (5) indicator
Shows when the selected frequency is being
broadcast in stereo.
1 Touch the source icon and then touch
RADIO to select the radio.
2 Touch BAND to select a band.
Touch BAND until the desired band (FM1,
FM2, FM3 for FM or MW/LW) is displayed.
3 To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press-
ing o or p.
4 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
Operating this unit
En
19
Section
03
Operating
this
unit