beautypg.com

Storing and recalling broadcast, Frequencies, Introduction of advanced – Pioneer AVH-P5900DVD User Manual

Page 20: Operations, Storing the strongest broadcast, Tuning in strong signals 20, Operating this unit, Storing and recalling broadcast frequencies, Introduction of advanced operations, Storing the strongest broadcast frequencies

background image

# You can also perform seek tuning by pressing
and holding o or p.

Note

Listening MW radio while an iPod is charged
from this unit may generate noise. In this case,
turn the iPod charge setting off and noise is dis-
appeared. (Refer to Switching the iPod charge set-
ting on page 52.)

Storing and recalling broadcast
frequencies

You can easily store up to six broadcast fre-
quencies for later recall.
! Up to 18 FM stations, six for each of the

three FM bands, and six MW/LW stations
can be stored in memory.

1

Touch LIST to display the preset list.

2

When you find a frequency that you

want to store in memory keep touching
one of preset tuning keys P1 to P6 until the
beep sounds.
The selected radio station frequency has been
stored in memory.
The next time you touch the same preset tun-
ing key the radio station frequency is recalled
from memory.

3

Touch ESC to return to the ordinary dis-

play.

Note

You can also use a and b to recall radio station
frequencies assigned to preset tuning keys

P1 to

P6.

Introduction of advanced
operations

1

Touch A.MENU and then touch

FUNCTION MENU to display the function
names.
The function names are displayed and oper-
able ones are highlighted.

2

Touch ESC to return to the frequency

display.

# To return to the previous display, touch BACK.

Storing the strongest broadcast
frequencies

BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning keys

P1 to P6

and once stored there you can tune in to those
frequencies with the touch of a key.
! Storing broadcast frequencies with BSM

may replace broadcast frequencies you
have saved using

P1 to P6.

% Touch BSM on the function menu to
turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning keys

P1 to P6 in

order of their signal strength. When finished,
BSM stops flashing.

# To cancel the storage process, touch BSM
again.

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.

Operating this unit

En

20

Section

03