Memorizing stations 27, Recalling memorized stations 27, Using the tuner – Pioneer VSX-D510 User Manual
Page 27: 2 press, 3 press, 4 press, 1 press the, Button on the remote control or turn the, On the receiver to select the tuner mode. 2 press, 3 use the
27
En
Memorizing Stations
If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time.
The VSX-D510 can memorize up to 30 stations, stored
in three banks, or classes, (A, B and C) of 10 stations
each. When memorizing FM frequencies, the receiver
also stores the MPX setting (auto stereo or mono, see
p.26). The process for memorizing stations is only
possible from the controls on the front panel of the
receiver.
1 Tune to a station you want to memorize.
See Finding a Station and Tuning Directly to a
Station, on pages 26 and this page, for more on how
to do this.
2 Press
MEMORY
.
The display shows a blinking memory class.
SP A
STEREO
TUNED
3 Press
CLASS
to select one of the three
classes.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
4 Press
STATION +/–
to select the desired
station memory number.
Pressing these buttons repeatedly cycles through the
10 available station memories in each class.
After choosing the location you want, the preset class
and number blink for about 5 seconds and the
receiver stores the station.
Repeat steps 1 to 4 to memorize up to 30 stations.
2 3
1
Using the Tuner
Recalling Memorized Stations
Having memorized up to 30 stations (see this page for
how to do this), preset stations can be easily recalled.
2
3
4
1 Press the
MULTI CONTROL TUNER
button on
the remote control or turn the
MULTIJOG
DIAL
on the receiver to select the tuner
mode.
2 Press
CLASS
to select the class in which the
station is stored.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
3 Use the
STATION +/–
buttons to select the
station memory in which the station is
stored.
Alternatively, recall the station memory using the
number buttons on the remote control.
MEMO:
• If the receiver is left disconnected from the AC power
outlet for a lengthy period, the station memories will
be lost and will have to be reprogrammed.
DVD/LD TV/SAT VCR/DVR CD
D.ACCESS CHANNEL
ATT
VOL
MENU
TOP
MENU
VOL
CH
2
DSP MODE MIDNIGHT 5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL
EFFECT
ENTER
ENTER
FQ
FQ
ST
ST
TV CONTROL
FUNC
10 DISC
SIGNAL
SELECT
TEST
TONE
RECEIVER TUNER TV CONT
1
2
3
4
1
¡
4
¢
7
8
3
5
6
7
8
9
0
‡
SOURCE CLASS MPX BAND
2
1
3
3