Pioneer DEH-P88RS-II - Manual (Page 27)

Introduction of advanced
built-in CD player operation
1 1 1
1 Function display
Shows the function status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn
MULTI-CONTROL to switch between the
functions in the following order.
Play mode (repeat play)
—Random mode
(random play)
—Scan mode (scan play)—
Pause (pause)
—Search mode (search meth-
od)
—TitleInput "A" (disc title input)
# You can also switch between the functions in
reverse order by turning
MULTI-CONTROL coun-
terclockwise.
# To return to the playback display, press BAND.
Notes
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
! TitleInput "A" (disc title input) function is
not canceled automatically.
Repeating play
There are two repeat play ranges for the built-
in CD player:
Disc repeat (disc repeat) and
Track repeat (one-track repeat).
1 Use MULTI-CONTROL to select
Play mode in the function menu.
Play mode appears in the display.
2 Press MULTI-CONTROL to select the re-
peat range.
Press
MULTI-CONTROL repeatedly until the
desired repeat range appears in the display.
! Disc repeat – Repeat the current disc
! Track repeat – Repeat just the current
track
Note
If you perform track search or fast forward/re-
verse during
Track repeat, the repeat play range
changes to Disc repeat.
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
1 Use MULTI-CONTROL to select
Random mode in the function menu.
Random mode appears in the display.
2 Press MULTI-CONTROL to turn random
play on.
Tracks play in a random order.
# To turn random play off, press
MULTI-CONTROL again.
Built-in CD Player
En
27
English
Section
06