Basic operations turning the unit on, Selecting a source, Loading a disc – Pioneer DEH-P88RS-II User Manual
Page 14: Turning the unit on, Basic operations
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source, the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 26).
% Press SOURCE to select a source.
Press
SOURCE repeatedly to switch between
the following sources.
Tuner
—Television—DVD player/Multi-
DVD player
—Built-in CD player—Multi-
CD player
—iPod—External unit 1—Exter-
nal unit 2
—AUX1—AUX2
Notes
! In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc in the unit.
— When there is no disc in the DVD player.
— When there is no magazine in the multi-
CD player.
— When there is no magazine in the multi-
DVD player.
— When AUX (auxiliary input) is set to off
(refer to page 72).
! External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
! When this unit’s blue/white lead is connected
to the vehicle
’s auto-antenna relay control
terminal, the vehicle
’s antenna extends when
this unit
’s source is turned on. To retract the
antenna, turn the source off.
Loading a disc
1
Press EJECT to open the front panel.
CD loading slot appears.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
2
Insert a CD into the CD loading slot.
Front panel is closed automatically, and play-
back will start.
CD loading slot
# You can eject a CD by pressing EJECT.
Notes
! The built-in CD player plays one standard, 12-
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read,
Format read is displayed.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT to eject the disc, and check the
disc for damage before inserting it again.
Basic Operations
En
14
Section
03