Pioneer AVD-W8000 - Manual (Page 19)

18
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Picture Adjust (BRIGHT/CONTRAST/COLOR/HUE)
You can change the brightness [BRIGHT] of black, contrast [CONTRAST], darkness of
colors [COLOR], and the hue [HUE] of video to taste. Separate settings are stored for
video from VCR1 and that from VCR2.
1. Display the video to adjust.
Press the SELECTOR or V.SEL button.
2. Display a menu screen (Refer to page 16).
The [PICTURE ADJUST] menu is displayed. [BRIGHT] has already been selected.
3. Select an item to adjust.
Press the VOLUME control (
∞/5) buttons.
4. Adjust the item.
Press the
2/3 buttons.
Either can be adjusted within the range of –24 to +24.
5. Complete the setting.
Press the WIDE/MENU button.
Each time you press the button, the setup menu changes.
Press the button a number of times to close the menu and complete the setting.
S E L
P I C T U R E A D J U S T
COLOR
BRIGHT BRIGHT BRIGHT
CONTRAST CONTRAST
HUE HUE
DIMMER
DIMMER
CONTRAST
HUE
DIMMER
Note:
• The settings of [BRIGHT] and [CONTRAST] are stored separately for light ambient (daytime) and
dark ambient (nighttime).
• A yellow mark ( ) or blue mark ( ) is displayed to the right of [BRIGHT] and [CONTRAST]
on the screen, respectively, as the front-panel ambient light sensor determines brightness or dark-
ness.
• [HUE] cannot be adjusted for PAL video.
Adjustment item
2 side 3 side
BRIGHT Brightness of black Makes black appear darker. Makes black appear lighter.
CONTRAST Contrast Narrows the gap between Widens the gap between
black and white (darken). black and white (brighten).
COLOR Color darkness Makes colors appear lighter. Makes colors appear darker.
HUE Hue Increases red. Increases green
The external light sensor of the display senses
the ambient brightness and displays a mark indi-
cating the current brightness.
(blue) : when dark (nighttime)
(yellow) : when bright (daytime)