Audio setting, Setting the mixing of the guidance voice [guide, Operating the setup menu – Pioneer AVD-W6210 User Manual

Page 20

Audio Setting

7 [GUIDE]

This setting controls whether the volume of each source is automatically muted during
voice guidance.

Setting the Mixing of the Guidance Voice [GUIDE]

When connecting the Pioneer Navigation unit to the 26-pin input of this hide-away unit,
you can select three types of setting for the guidance voice from the Pioneer Navigation
unit.

1. Display the setup menu and select [AUDIO SETTING]. (Refer to page 13.)

2. Select a desired setting.

Pressing

2/3 will switch between [ATT] (attenuation), [MUTE] (muting) and

[NORMAL] (normal).

[ATT] :

Volume is set to 1/4.

[MUTE] :

Volume is turned to 0.

[NORMAL] : Volume remains the same.

7 [SPEAKER]

You can select [ON] or [OFF] for the audio from the built-in speaker.

Note:

• You can hear the Navigation voice guidance even if you select [OFF] for the audio from the built-in

speaker.

Operating the Setup Menu