Pioneer DCS-580 - Manual (Page 35)

Other connections 10
35
En
• Connect the LINE 3 AUDIO IN jacks to the
analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.
Using the SCART AV output
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
1
• Use a commercially available SCART cable
to connect the (LINE 1) AV CONNECTOR to
your TV.
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV/monitor.
Recording mode
The recording mode allows you to make
surround-compatible analog recordings from
the
LINE OUT jacks. 2 Dolby multichannel
sources are downmixed to stereo for improved
playback with systems that can provide matrix-
decoding (like Dolby Pro Logic).
1 Press SOUND.
2 Use / to select REC MODE, then press
ENTER.
3 Use / to choose MODE ON or MODE
OFF and then press ENTER to confirm.
• MODE ON – A surround-compatible
downmix (left-total/right-total, or Lt/Rt) of
Dolby multichannel sources is output,
(suitable for Dolby Surround Pro Logic or
other matrix decoding).
• MODE OFF – A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
Note
1 SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/
monitor (see SCART pin assignment below).
Pin No. Assignment Pin No. Assignment
1 Audio R OUT 12 No connection
MCACC
SETUP MIC DIGITAL IN VIDEO OUT CONTROL
AV CONNECTOR
IN
LINE 1
OPTICAL
LINE 2
TV
To SCART
input
2 Audio R IN 13 GND (video)
3 Audio L OUT 14 GND (video)
4 GND (audio) 15 R or C OUT
5 GND (video) 16 BLANK OUT
6 Audio L IN 17 GND (video)
7 B OUT 18 GND (video)
8 Status 19 Video or Y OUT
9 GND (video) 20 No connection
10 No connection 21 GND (video)
11 G OUT
2 • When the recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while the recording mode is on.
• When the recording mode is off, the audio from the analog output jacks may be interrupted, depending on the operation.
• The recording mode switches off if you change the input function (
DVD/CD, TUNER, etc.) or switch the power off.
Pin No. Assignment Pin No. Assignment
Other connections.fm 35 ページ ２００８年３月１２日 水曜日 午前１０時３９分