Head unit, Display indication, Set up menu – Pioneer MVH-X560BT User Manual
Page 3: Basic operations, Using this unit
Black plate (3,1)
Head unit
5
9
1 23 4
6
8
7
b
a
1
SRC/OFF
2
LEVER
3
MULTI-CONTROL (M.C.)
4
(list)
5
(phone)
6
BAND/
(iPod control)
7
(back)/
DIMMER (dimmer)
8
MIX (MIXTRAX)
9
1/
to
6/
a
DISP
b
Detach button
Display indication
1
8
c
a
7 9 b
6
5
2
4
d
e
3
f
1
Main information section
! Tuner: band and frequency
! RDS: program service name, PTY infor-
mation and other literal information
! USB storage device and iPod: elapsed
playback time and text information
2
(auto answer)
Shows when the automatic answering func-
tion is on.
3
Appears when a lower tier of folder or menu
exists.
4
(list)
5
Sub information section
6
LOC (local seek tuning)
7
TP (traffic program identification)
8
TA (traffic announcements)
9
(sound retriever)
a
(random/shuffle)
b
(repeat)
c
(Bluetooth indicator)
d
(Bluetooth audio indicator)
e
(Bluetooth phone indicator)
f
(iPod control)
This unit
’s iPod function is operated from
your iPod.
Set up menu
1
After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2
Turn M.C. to switch to YES.
# If you do not use the unit for 30 seconds, the set
up menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to
NO.
3
Press M.C. to select.
4
Follow these steps to set the menu.
To proceed to the next menu option, you need to
confirm your selection.
LANGUAGE (multi-language)
This unit can display the text information from a
compressed audio file even for information em-
bedded in English, Russian or Turkish.
! If the embedded language and the selected
language setting are not the same, text infor-
mation may not display properly.
! Some characters may not be displayed prop-
erly.
1 Turn M.C. to select the desired setting.
ENG (English)
—РУС (Russian)—TUR (Turk-
ish)
2 Press M.C. to confirm the selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Use
FM STEP to set FM tuning step options (seek
step settings).
1 Turn M.C. to select the FM tuning step.
100 (100 kHz)
—50 (50 kHz)
2 Press M.C. to confirm the selection.
QUIT appears.
! The manual tuning step is fixed at 50 kHz.
! When AF and TA are turned off, the seek step
is fixed at 50 kHz even if set to
100.
5
To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6
Press M.C. to select.
Notes
! You can set up the menu options from the
system menu and initial menu. For details
about the settings, refer to System menu on
page 12 and Initial menu on page 14.
! You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
! Handle the front panel with care when re-
moving or attaching it.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
English
Using this unit
3
Section
Using this unit
En
02