System menu, Selecting the illumination color, Using this unit – Pioneer MVH-X560BT User Manual

Page 12

Black plate (12,1)

SLA (source level adjustment)

This function prevents the volume from changing
too dramatically when the source switches.
! Settings are based on the FM volume level,

which remains unchanged.

! The MW/LW volume level can also be adjusted

with this function.

! Each of the below combinations are set to the

same setting automatically.
! USB, iPod and APP (iPhone)
! BT AUDIO and APP (smartphone)

1 Press M.C. to display the setting mode.
2 Turn M.C. to adjust the source volume.

Adjustment range:

+4 to

–4

System menu

Important

PW SAVE (power saving) is canceled if the ve-
hicle battery is disconnected and will need to be
turned back on once the battery is reconnected.
When

PW SAVE (power saving) is off, depend-

ing on connection methods, the unit may con-
tinue to draw power from the battery if your
vehicle

’s ignition doesn’t have an ACC (acces-

sory) position.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to select the system menu

function.
Once selected, the following system menu func-
tions can be adjusted.

LANGUAGE (multi-language)

1 Press M.C. to select the desired setting.

ENG (English)

—РУС (Russian)—TUR (Turk-

ish)

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.
2 Press M.C. to select the segment of the clock

display you wish to set.
Hour

—Minute

3 Turn M.C. to adjust the clock.

12H/24H (time notation)

1 Press M.C. to select the desired setting.

12H (12-hour clock)

—24H (24-hour clock)

INFO DISPLAY (sub information)

The type of text information displayed in the sub
information section can be toggled.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.

SPEANA

—LEVEL METER—SOURCE—CLOCK

—OFF

! The signal bar indicator displays for SPEANA

LEVEL METER when the source is set to

RADIO.

AUTO PI (auto PI seek)

The unit can automatically search for a different
station with the same programming, even during
preset recall.
1 Press M.C. to turn Auto PI seek on or off.

AUX (auxiliary input)

Activate this setting when using an auxiliary de-
vice connected to this unit.
1 Press M.C. to turn AUX on or off.

DIMMER (dimmer)

1 Press M.C. to turn the dimmer on or off.
! You can also change the dimmer setting by

pressing and holding

DIMMER.

BRIGHTNESS (brightness adjustment)

You can use this setting to adjust the display
brightness.
The range of settings available for

BRIGHTNESS

will vary depending on whether

DIMMER is on or

off. For details, refer to

DIMMER (dimmer) on page

12.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.

DIMMER on: 1 to 4
DIMMER off: 1 to 5

BT AUDIO (Bluetooth audio activation)

You need to activate the

BT AUDIO source in order

to use a Bluetooth audio player.
1 Press M.C. to turn the BT AUDIO source on or

off.

PW SAVE (power saving)

Switching this function on enables you to reduce
the consumption of battery power.
! Turning on the source is the only operation al-

lowed when this function is on.

1 Press M.C. to turn the power save on or off.

BT MEM CLEAR (clearing the Bluetooth device
data stored on this unit)

Bluetooth device data stored on this unit can be
cleared. To protect your personal information,
clear the device memory before you pass the unit
on to someone else. The following information will
be deleted.
Device list/PIN code/call history/phone book/pre-
set phone numbers
1 Press M.C. to show the confirmation display.

YES is displayed. Clearing memory is now on
standby.
If you do not want to clear the Bluetooth device
data stored on this unit, turn

M.C. to display

CANCEL and press it again to select.

2 Press M.C. to clear the memory.

CLEARED is displayed and the Bluetooth de-
vice data is cleared.

! While this function is in use, do not turn off

the engine.

BT VERSION (Bluetooth version display)

You can display the system versions of this unit
and of Bluetooth module.
1 Press M.C. to display the information.

APP CONN. SET (APP connect mode setting)

Select an appropriate option for your connected
device.
1 Press M.C. to select the desired setting.

WIRED (for iPhone)

—BLUETOOTH (for smart-

phone)

! This setting is not available when the source is

set to

APP.

Selecting the illumination color

Illumination function menu

Press M.C. to display the main menu.

Turn M.C. to display ILLUMI and press to

select.

Using this unit

Section

Using this unit