About mixtrax, Using this unit – Pioneer MVH-X560BT User Manual

Page 13

Black plate (13,1)

Turn M.C. to select the illumination func-

tion.
Once selected, the following audio functions
can be adjusted.

KEY COLOUR (key section color setting)

You can select desired colors for the keys of this
unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to

BLUE)

! SCAN (cycle through a variety of colors au-

tomatically)

! CUSTOM (customized illumination color)

DISP COLOUR (display section color setting)

You can select the desired colors for the display of
this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to

BLUE)

! SCAN (cycle through a variety of colors au-

tomatically)

! CUSTOM (customized illumination color)

BOTH COLOUR (key and display color setting)

You can select the desired colors for the keys and
display of this unit.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.

! Preset colors (ranging from WHITE to

BLUE)

! SCAN (cycle through a variety of colors au-

tomatically)

PHONE COLOUR (phone color setting)

Selecting the key colors displayed when a call is
received
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the illumination color.

! FLASHING – The color selected from KEY

COLOUR flashes.

! FLASH MODE1 to FLASH MODE6 – The

system automatically cycles through all
available key colors for this unit. Select the
desired mode.

! OFF – No change in key color made when

incoming calls are received.

ILLUMI FX (illumination effect mode)

When this mode is enabled, an illumination effect
with lights that slowly fade in and out in a set pat-
tern will appear on the display and keys to signify
changes.
1 Press M.C. to turn ILLUMI FX on or off.
! The illumination effect will flash momentarily

when the ignition is turned ON/OFF, regardless
of whether the

ILLUMI FX setting is on or off.

Notes

! When CUSTOM is selected, the customized

color saved is selected.

! CUSTOM can be set separately from the

DIMMER on/off setting.

Customizing the illumination color

You can create custom illumination colors for
both

KEY COLOUR and DISP COLOUR.

Press M.C. to display the main menu.

Turn M.C. to display ILLUMI and press to

select.

Turn M.C. to display KEY COLOUR or

DISP COLOUR. Press to select.

Press M.C. and hold until the customizing

illumination color setting appears in the dis-
play.

Press M.C. to select the primary color.

R (red)

—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range:

0 to 60

# You cannot select a level below 20 for all three of
R (red), G (green), and B (blue) at the same time.
# You can also perform the same operation on
other colors.

Note

You cannot create a custom illumination color
while

SCAN is selected.

About MIXTRAX

MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
to experience your music as a nonstop mix com-
plete with visual effects.

Notes

! Depending on the file/song, sound effects

may not be available.

! Turn MIXTRAX off if the visual effects it pro-

duces have adverse effects on driving. Refer
to Operations using the MIXTRAX button on
page 5.

MIXTRAX menu

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select MIXTRAX.

Turn M.C. to select the MIXTRAX func-

tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
MIXTRAX is on.

SHORT PLAYBCK (short playback mode)

You can select the length of the playback time.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.

1.0 MIN (1.0 minute)

—1.5 MIN (1.5 minutes)—

2.0 MIN (2.0 minutes)

—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

FLASH AREA (flash area)

You can select areas for flashing colors.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.

KEY/DISPLAY (key and display)

—KEY (key)—

OFF (off)

! When OFF is selected, the color set under IL-

LUMI is used as the display color.

FLASH PATTERN (flash pattern)

The flashing color and MIXTRAX special effects
display change with changes in the sound and
bass levels.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.

! SOUND LEVEL 1 to SOUND LEVEL 6 – The

flash pattern changes according to the
sound level. Select a desired mode.

! LOW PASS 1 to LOW PASS 6 – The flash

pattern changes according to the bass
level. Select a desired mode.

! RANDOM 1 – The flash pattern changes

randomly according to the sound level
mode and low pass mode.

! RANDOM 2 – The flash pattern changes

randomly according to the sound level
mode.

! RANDOM 3 – The flash pattern changes

randomly according to the low pass mode.

English

Using this unit

Section

Using this unit