Basic operation – Pioneer AVIC-F550BT User Manual
Page 25

25
Basic operation
3. Tap [Destination] on the “Top Menu”
screen.
After a short pause, the splash screen comes
on for a few seconds.
4. Select the language that you want to use
on the screen, then touch [Done].
❒
Later you can change it in “Regional”
settings.
➲
For details, refer to “Customising the
regional settings” on page 96.
The navigation system will restart and the
“End User Licence Agreement” screen is
displayed.
5. Read the terms carefully, checking its
details, and then touch [Accept] if you
agree to the conditions.
The configuration wizard starts.
6. Touch [Next] to continue.
7. Select the language that you want to use
for voice guidance messages, then touch
[Next].
❒
Later you can change it in “Sound and
Warnings” settings.
➲
For details, refer to “Setting the volume and
the guidance voice for navigation system”
on page 91.
8. If needed, modify the time format and unit
settings, then touch [Next].
❒
Later you can change it in “Regional”
settings.
➲
For details, refer to “Customising the
regional settings” on page 96.
9. If needed, modify the default route
planning options, then touch [Next].
❒
Later you can change them in “Route
Settings”.
➲
For details, refer to “Modifying the route
calculation conditions” on page 50.
❒
You can restart the configuration wizard
later from the “Settings” menu.
➲
For details, refer to “Starting the
configuration wizard” on page 96.
10.Touch [Finish].
The initial setup is now complete.
After touching [Finish], the “Navigation
Menu” screen appears and you can start
using the navigation system.
13-MAN-AVICF550-EN.fm Page 25 Monday, April 8, 2013 3:02 PM