Pioneer RMX-1000-M - Manual (Page 15)

15 En
English
Types of effects
Types of SCENE FX effects
BPF ECHO
This function superimposes the input sound that has passed through the
band pass filter onto the original input sound and passes this through
the echo circuit before outputting the sound.
The echo is output several times according to the multiplying factor of
the input sound’s beat, with the delay sound gradually attenuating.
Input sound
SCENE FX
control
Input sound that has passed
through the band pass filter
Frequency
SCENE FX control Sets the band pass filter’s cutoff frequency.
SUB PARAMETER 1
control
Sets the echo sound’s delay time.
SUB PARAMETER 2
control
Applies a modulation effect to the output.
ECHO
The echo is output several times according to the multiplying factor of
the input sound’s beat, with the delay sound gradually attenuating.
Input sound turned off
Time
Fade-out
1 beat
SCENE FX control
Use this to set the balance between the original sound
and the echo sound.
SUB PARAMETER 1
control
Sets the echo sound’s delay time.
SUB PARAMETER 2
control
Sets the filter’s cut-off frequency.
NOISE
This function passes white noise generated internally through the band
pass filter and echo before outputting it.
Frequency SCENE FX
control
SCENE FX control
Sets the cutoff frequency of the filter through which the
white noise passes.
SUB PARAMETER 1
control
Sets the volume of the white noise.
SUB PARAMETER 2
control
Applies a modulation effect to the white noise.
SPIRAL UP
This function adds a reverberation effect to the input sound.
When the delay time is changed, the pitch changes simultaneously.
Input sound turned off
Time
Fade-out
1 beat
SCENE FX control Sets the SPIRAL’s delay time.
SUB PARAMETER 1
control
Sets the echo sound’s delay time.
SUB PARAMETER 2
control Sets the amount of pitch shifting by which the pitch is
raised.
REVERB UP
This function adds a reverberation effect to the input sound.
Level
Direct sound
Early reflected sound
Reverberations
Time
SCENE FX control Use this to set the degree of the reverb effect.
SUB PARAMETER 1
control
Use this to set the degree of the reverb effect.
SUB PARAMETER 2
control
Sets the cutoff frequency of the high pass filter.
HPF ECHO
This function passes the input sound through the high pass filter and
echo before outputting it.
The echo is output several times according to the multiplying factor of
the input sound’s beat, with the delay sound gradually attenuating.
Frequency
SCENE FX control Sets the cutoff frequency of the high pass filter.
SUB PARAMETER 1
control
Sets the echo sound’s delay time.
SUB PARAMETER 2
control
Applies a modulation effect to the output.
LPF ECHO
This function passes the input sound through the low pass filter and
echo before outputting it.
The echo is output several times according to the multiplying factor of
the input sound’s beat, with the delay sound gradually attenuating.