Pioneer DEH-X5500BT - Manual (Page 21)

MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing
you to experience your music as a nonstop
mix complete with visual and lighting effects.
Notes
! Depending on the file/song, sound effects
may not be added.
! MIXTRAX includes a MIXTRAX flashing color
mode that when switched on turns the flash-
ing colors on and off in time with the audio
track. If you find the feature distracting while
driving, please turn MIXTRAX off. Refer to Op-
erations using the MIXTRAX button on page
8.
MIXTRAX menu
Only for DEH-X5500BT
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX func-
tions can be adjusted. The function is enabled
when MIXTRAX is on.
SHT PLAYBACK (short playback mode)
You can select the length of the playback time.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute) —1.5 MIN (1.5 minutes)—
2.0 MIN (2.0 minutes) —2.5 MIN (2.5 minutes)—
3.0 MIN (3.0 minutes) —OFF (off)
! Turn this option OFF if you want to play a selection
all the way through from start to finish.
FLASH AREA (flash area)
You can select areas for flashing colors.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
KEY/DISPLAY (key and display) —KEY (key)—OFF
(off)
! When OFF is selected, the color set under ILLUMI
is used as the display color.
FLASH PATTERN (flash pattern)
You can select flashing color patterns.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
! SOUND LEVEL 1 to SOUND LEVEL 6 – Flash-
ing colors will flash on and off in synchroniza-
tion with the sound level in a song. Select the
desired mode.
! LOW PASS 1 to LOW PASS 6 – Flashing col-
ors will flash on and off in synchronization
with the bass level in a song. Select the de-
sired mode.
! RANDOM 1 – The pattern for the flashing col-
ors is randomly selected from the sound level
mode and low pass mode.
! RANDOM 2 – The pattern for the flashing col-
ors is randomly selected from the sound level
mode.
! RANDOM 3 – The pattern for the flashing col-
ors is randomly selected from the low pass
mode.
DISPLAY FX (display effect)
The MIXTRAX special effects display can be turned on
or off.
1 Press M.C. to select the desired setting.
ON (MIXTRAX special effects display) —OFF (nor-
mal display)
CUT IN FX (manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1 Press M.C. to select the desired setting.
ON (on) —OFF (off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold SRC/OFF until the main
menu appears in the display.
3 Turn M.C. to change the menu option
and press to select INITIAL.
4 Turn M.C. to select the initial menu
function.
Once selected, the following initial menu func-
tions can be adjusted.
En
21
Section
02
Operating
this
unit
Operating this unit