Selecting gauges 12, Selecting gauges, Basic operations – Pioneer AVG-VDP1 User Manual

Page 12

6 Compass

Shows the direction your vehicle is travel-

ling.

7 Longitude and latitude (LON./LAT.)

Shows the longitude and latitude of the cur-

rent location of your vehicle.

8 Speedometer (SPEED)

Shows your vehicle speed.

Vehicle status mode

You can customize the graph and the back-

ground.

! To customize the graph, refer to Customiz-

ing the graph on page 17.

! To select the background, refer to Selecting

the background display on page 14.

1 Graph

Shows the graph of speed vs time.

2 Time (TIME)

Shows the current time.

3 Speedometer (SPEED)

Shows your vehicle speed.

4 Tachometer (TACH)

Shows the engine speed in revolutions per

minute (rpm).

5 Acceleration (ACC.G)

Shows the acceleration in a forward direc-

tion. The + sign indicates acceleration

while the sign indicates deceleration

(braking).

Selecting gauges

You can change the combination of gauges.

! This function can be operated only when

selecting the analog mode.

1 Touch Select Gauge.

The touch panel keys for selecting the gauges

are displayed.

# When Select Gauge is not displayed, you can
display it by touching the screen.

2 Touch the middle of a gauge that you

want to change.

The cursor moves to the selected gauge.

3 Touch i or j to select the gauge type.

Each time you touch i or j selects the

gauge types in the following order:

TACH (tachometer)BATT. (voltmeter)

ACC.G (accelerometer)LAT.G (lateral ac-

celerometer)POWER (horsepower meter)

TORQUE (torque meter)tiltmeterSPEED

(speedometer)

4 Touch k or l to switch among the po-

sition of the gauges.

Basic Operations

Section