Pioneer DEH-X9500BT - Manual (Page 27)

1 Press M.C. to select the segment of the clock dis-
play you wish to set.
Hour
—Minute
2 Turn M.C. to adjust the clock.
EngineTime alert (elapsed time display setting)
This setting displays how much time has elapsed
since the machine was turned on.
You can set a timer and an alarm.
1 Press M.C. to select the desired setting.
OFF —15Minutes—30Minutes
Auto PI (auto PI seek)
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
1 Press M.C. to turn Auto PI seek on or off.
Music browse (music browse)
You can select an device on which to browse music.
1 Press M.C. to select the desired setting.
OFF —USB memory1—USB memory2—SD card
Warning tone (warning tone setting)
If the front panel is not detached from the head unit
within four seconds of turning off the ignition, a warn-
ing tone sounds. You can turn off the warning tone.
1 Press M.C. to turn the warning tone on or off.
AUX (auxiliary input)
Activate this setting when using an auxiliary device
connected to this unit.
1 Press M.C. to turn AUX on or off.
Dimmer (dimmer setting)
To prevent the display from being too bright at night,
the display is automatically dimmed when the car
’s
headlights are turned on. You can turn the dimmer on
or off.
1 Press M.C. to turn dimmer on or off.
Contrast (display contrast setting)
1 Press M.C. to display the setting mode.
2 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or de-
creased.
Ever-scroll (scroll mode setting)
When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1 Press M.C. to turn the ever scroll on or off.
BT AUDIO (Bluetooth audio activation)
You need to activate the BT Audio source in order to
use a Bluetooth audio player.
1 Press M.C. to turn the BT Audio source on or off.
Clear memory (clearing the Bluetooth device data
stored on this unit)
Bluetooth device data stored on this unit can be
cleared. To protect your personal information, clear
the device memory before you pass the unit on to
someone else. The following information will be de-
leted.
! Device list
! PIN code
! Call history
! Phone book
1 Press M.C. to show the confirmation display.
Clear memory YES is displayed. Clearing mem-
ory is now on standby.
If you do not want to clear the Bluetooth device
data stored on this unit, turn
M.C. to display Can-
cel and press it again to select.
2 Press M.C. to clear the memory.
Cleared is displayed and the Bluetooth device
data is cleared.
! While this function is in use, do not turn off
the engine.
BT Version info. (Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1 Press M.C. to display the information.
APP CONNECT MODE (APP connect mode setting)
Select an appropriate option for your smartphone.
1 Press M.C. to select the desired setting.
Wired (for iPhone)
—Bluetooth (for Android de-
vice)
Set up menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main
menu appears in the display.
3 Turn M.C. to change the menu option
and press to select SETUP.
En
27
Section
02
Using
this
unit
Using this unit