Pioneer DEH-X9500BT - Manual (Page 19)

Bluetooth Audio
Important
! Depending on the Bluetooth audio player con-
nected to this unit, the available operations
will be limited to the following two levels:
— A2DP profile (Advanced Audio Distribution
Profile): You can only playback songs on
your audio player.
You cannot use the A2DP connection
when
iPod is selected as a source.
— AVRCP profile (Audio/Video Remote Con-
trol Profile): You can perform playback,
pause playback, select songs, etc.
! Functions will vary depending on the
Bluetooth audio player you are using. When
using your player with this unit, refer to the in-
struction manual that came with your
Bluetooth audio player as well as this manual.
! As the signal from your cellular phone may
cause noise, avoid using it when you are lis-
tening to songs on your Bluetooth audio
player.
! The sound of the Bluetooth audio player will
be muted when the phone is in use.
! When the Bluetooth audio player is in use,
you cannot connect to a Bluetooth telephone
automatically.
! Playback continues even if you switch from
your Bluetooth audio player to another source
while listening to a song.
! Depending on the type of Bluetooth audio
player you have connected to this unit, opera-
tion and information display may not be avail-
able for some functions.
Setting up for Bluetooth audio
Before you can use the Bluetooth audio func-
tion you must set up the unit for use with your
Bluetooth audio player. You will need to pair
this unit with your Bluetooth audio player.
1 Connection
Use the Bluetooth telephone connection menu.
Refer to Connection menu operation on page 17.
Basic operations
6 5 3
2 1
4
1 Device name
Shows the device name of the connected
Bluetooth audio player.
2 Track number indicator
3 PLAY/PAUSE indicator
4 S.Rtrv indicator
Appears when Sound Retriever function is on.
5 Song time (progress bar)
6 Play time indicator
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Selecting a track
1 Turn LEVER.
Pausing and starting playback
1 Press BAND/ .
Switching the display
Selecting the desired text information
% Press
/DISP.
Note
Depending on the device, text information can be
changed.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
En
19
Section
02
Using
this
unit
Using this unit