Pioneer DEH-X9500BT - Manual (Page 10)

When Alternative FREQ is used, the regional func-
tion limits the selection of stations to those broad-
casting regional programs.
1 Press M.C. to turn the regional function on or off.
Local (local seek tuning)
Local seek tuning allows you to tune in to only those
radio stations with sufficiently strong signals for good
reception.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn local on or off.
3 Turn M.C. to select the desired setting.
FM: Level 1 —Level 2—Level 3—Level 4
MW/LW: Level 1
—Level 2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
PTY search (program type selection)
You can tune in to a station using PTY (program type)
information.
1 Turn LEVER left or right to select the desired set-
ting.
News&Inf
—Popular—Classics—Others
2 Press M.C. to begin the search.
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
PTY (program type ID code) information is listed
in the following section. Refer to PTY list on page
8.
To cancel the search, press
M.C. again.
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of program
you searched for,
Not found is displayed for
about two seconds and then the tuner returns to
the original station.
Traffic Announce (traffic announcement standby)
1 Press M.C. to turn traffic announcement standby
on or off.
Alternative FREQ (alternative frequencies search)
When the tuner cannot get a good reception, the unit
automatically searches for a different station in the
same network.
1 Press M.C. to turn the alternative frequencies
search on or off.
News interrupt (news program interruption)
1 Press M.C. to turn the NEWS function on or off.
Tuning Mode (LEVER tuning setting)
You can assign a function to the LEVER on the unit.
Select Manual (manual tuning) to tune up or down
manually or select Preset (preset channel) to switch
between preset channels.
1 Press M.C. to select Manual or Preset.
CD/CD-R/CD-RW and external
storage devices (USB, SD)
Basic operations
DEH-X9500BT
7 5 6 4
3 2 1
DEH-X9500SD
7 6 4
3 2 1
5
1 Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
! When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, de-
pending on the software used to decode
AAC files,
VBR may be displayed.
2 Folder number indicator
Shows the current folder number when play-
ing a compressed audio file.
3 Track number indicator
4 PLAY/PAUSE indicator
5 S.Rtrv indicator
Appears when Sound Retriever function is on.
En
10
Section
02 Using this unit