Pioneer KRL-32V - Manual (Page 38)

Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
4:3 Mode
Setup
The “WSS” signal has 4:3 auto-switching that allows
you to select between “4:3” and “WIDE”.
4:3 mode “WIDE” 4:3 mode “4:3”
The “WSS” allows the TV to switch automatically
among the different picture size.
NOTE
Use SCREEN SIZE if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no “WSS” information, the function will not work
even if enabled.
Selecting the WSS (Wide Screen
Signalling) picture size manually
•
Selecting the picture size
Selecting the WSS (Wide Screen
Signalling) picture size automatically
4:3: Normal range keeping 4:3 or 16:9 aspect ratio.
WIDE: Wide image without side bars.
Selecting the picture size manually
You can select the picture size. Selectable picture size
varies with the type of signal received.
4:3: Keeps the original aspect ratio in a full screen display.
CINEMA 14:9: For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also see bars on
the top and bottom with some programmes.
WIDE: In this mode, the picture is stretched toward each
side of the screen.
FULL: For 16:9 squeeze pictures.
ZOOM: For 16:9 letterbox pictures. Bars may appear on
the top and bottom with some programmes.
CINEMA: For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
FULL: Displays with an Overscan image. Crops all sides
of screen.
Underscan: Displays with an Underscan image only
when receiving a 720p signal. Displays with the High-
Definition image adjusted optimally. Noise may appear
on the edge of the screen with some programmes.
Dot by Dot: Displays an image with the same number
of pixels on the screen when receiving 1080i/1080p
signals only.
NOTE
Some items do not appear depending on the type of
received signal.
Press SCREEN SIZE.
The SCREEN SIZE menu displays.
The menu lists the SCREEN SIZE options selectable
for the type of video signal currently received.
Press SCREEN SIZE or a/b while the
SCREEN SIZE menu displays on the screen.
As you toggle the options, each is immediately
reflected on the screen. There is no need to press
ENTER
.
Basically, if you set “WSS” to “On” in the “Setup”
menu, the optimum SCREEN SIZE is automatically
chosen for every broadcast, VCR or DVD player/
recorder.
NOTE
Even if you select your desired SCREEN SIZE manually,
the TV may automatically switch to the optimum SCREEN
SIZE
depending on the signal received when “WSS” is set
to “On”.
•
1
•
•
2
•
•
35
Item
Item (for SD [Standard-Definition] signals)
Item (for HD [High-Definition] signals)
KRL3237V_GB.indd 35 KRL3237V_GB.indd 35 2008/06/13 14:50:28 2008/06/13 14:50:28