Pioneer KRL-32V - Manual (Page 34)

Basic adjustment
NOTE
The item marked with * is available only when selecting
“INPUT4”, “INPUT5”, “INPUT6” or “INPUT7” using
INPUT1–8
on the remore control unit or b on the TV.
The item marked with ** is available only when accepting
an “x.v.Colour” signal through an HDMI terminal.
•
•
Monochrome
For viewing a colour video in black & white.
Range of RLS
The brightness level range of the RLS’s automatic
adjustments can be set according to your preferences.
The adjustment range of the RLS can be set to a
maximum of
e16 and a minimum of f16.
Selectable
items
Description
Max. f16 through e16
Min. f16 through e16
NOTE
This function is available only when the “RLS” setting is set
to “On” or “On:Display”.
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the
RLS might not operate if the adjustment range is small.
AV SELECTION
AV SELECTION gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
Press AV SELECTION.
Each time you press AV SELECTION, the mode
changes.
You can also switch the mode on the “Picture” and
“Sound” menu screen by pressing AV SELECTION.
•
•
•
•
•
1
2
•
Sound Settings
Balance
Treble
Surround
Reset
[ 0]
[ 0]
–15
L
+15
R
[Off]
Bass
[ 0] –15 +15
DYNAMIC
STANDARD: For a highly defined image in a normally
bright room.
MOVIE: For viewing a movie in a darkened room.
GAME: For playing of video games.
PC*: For PC.
x.v.Colour**: Produce realistic colour on the TV screen
unlike any other signal.
USER: Allows you to customise settings as desired. You
can set the mode for each input source.
DYNAMIC (Fixed): For a clear-cut image emphasising
high contrast for sports viewing (The “Picture” and
“Sound” settings cannot be adjusted).
DYNAMIC: For a clear-cut image emphasising high
contrast for sports viewing.
Sound adjustment
Sound
Surround
Sound
No Signal Off
Power Control
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
Even if a TV programme finishes, this function may not
operate because of interference from other TV stations or
other signals.
•
•
This function allows you to enjoy realistic live sound.
Power Save Settings
No Signal Off
No Operation Off
Ecology
Sleep Timer
[Disable]
[Disable]
You can adjust the sound quality to your preference
with the following settings.
Selectable
items
c button d button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio from
the right speaker Decrease audio from
the left speaker
31
Item
KRL3237V_GB.indd 31 KRL3237V_GB.indd 31 2008/06/13 14:50:23 2008/06/13 14:50:23