Pioneer XW-NAS5-S - Manual (Page 19)

Sound settings 07
19
En
English
Français
Deutsch
Nederlands
Italiano
Español
• – Vinyl record sounds. Enjoy the
sound of scratches and hisses from a vinyl
record mixed with music from iPod, radio
tuner, or other external input source. (Even
greater effect is achieved when combined
with Low Fidelity sound mode.)
When mixed with music, even new tracks
produce a retro feel like looking at a sepia-
toned photograph.
Using the sound effects
You can add exciting effects to audio sources.
• Default setting: (OFF)
1 Press SETUP.
2 Use / to select ‘ ’, then press
ENTER.
3 Use / to switch Sound modes, then
press ENTER.
• (Auto Level Control) – This unit
equalizes playback sound levels.
• (Low Fidelity) – Produces a retro-feel
to music play.
• (Vivid) – Produces a sharpened
effect similar to that experienced at a live
concert.
• (OFF) – Revert sound to its natural state.
Adjusting the bass and treble
Use the bass and treble controls to adjust the
overall tone.
1 Press BASS/TREBLE.
2 Use / to select ‘ ’ (Bass) or
‘ ’ (Treble), then press ENTER.
3 Use / to adjust the bass or treble, then
press ENTER.
You can adjust low and high sounds on a scale
of
–6 to +6.
Using the Sound Retriever
When audio data is removed during the WMA/
MP3/MPEG-4 AAC compression process,
sound quality often suffers from an uneven
sound image. The Sound Retriever feature
employs new DSP technology that helps bring
CD quality sound back to compressed by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
• Default setting: (ON)
1 Switch the unit into standby.
2 Press SETUP.
3 Use / to select ‘ ’, then press
ENTER.
4 Use / to switch the sound retriever on
or off.
5 Press ENTER.
When the setting is completed, the newly set
value flashes for 3 seconds, then the power
returns to standby mode.
PRESET PRESET
ENTER
SLEEP
CLOCK SETUP
WAKE
UP
TUNER
PRESET
BASS/
TREBLE
TUNE
TUNE
07_sound.fm 19 ページ ２００９年８月２０日 木曜日 午後７時３７分