Connecting to a bluetooth device, Automatically, Switching visible unit – Pioneer AVH-3300BT User Manual
Page 41: Displaying bluetooth device address, Entering pin code for bluetooth wireless, Connection, Using a cellular phone to initiate a, Connecting to a bluetooth device automatically, Using a cellular phone to initiate a connection, Detailed instructions
Connecting to a Bluetooth
device automatically
(Function of AVH-3300BT)
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 21.
2
Touch Auto Connect to turn automatic
connection on.
If your Bluetooth device is ready for a Blue-
tooth wireless connection, a connection to
this unit will automatically be established.
# To turn automatic connection off, touch
Auto Connect again.
3
Turn your vehicle
’s ACC switch off and
on.
Switching visible unit
(Function of AVH-3300BT)
This function sets whether or not to make this
unit visible to the other device.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 21.
2
Touch Visibility to select visibility off.
! To turn visibility on, touch Visibility
again.
Displaying Bluetooth
Device address
(Function of AVH-3300BT)
This unit displays its Bluetooth device ad-
dress.
1
Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 21.
2
Touch Device Information to display de-
vice information.
The Bluetooth device address is displayed.
Entering PIN code for
Bluetooth wireless connection
(Function of AVH-3300BT)
To connect your Bluetooth device to this unit
via Bluetooth wireless technology, you need to
enter a PIN code on your Bluetooth device to
verify the connection. The default code is
0000, but you can change it with this function.
1
Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 21.
2
Touch PIN Code Input to select
PIN code input.
3
Touch 1 to 0 to input pin code.
4
After inputting PIN code (up to 8 di-
gits), store in this unit.
Storing the PIN code in this unit.
Using a cellular phone to
initiate a connection
(Function of AVH-P4300DVD)
A Bluetooth wireless connection can be estab-
lished from your phone by putting the unit into
initiating a connection mode.
En
41
Section
12
Detailed
instructions
Detailed instructions