Pioneer DEH-P90DAB - Manual (Page 64)

63
Initial Setting
Initial Setting Menu Functions
The Initial Setting Menu features the following functions.
Changing the FM Tuning Step (FM Tuning Step)
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
Note:
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Setting the DAB Priority Function (DAB Priority)
You can set the product in this mode so that interruption of traffic information from DAB
takes precedence over RDS Traffic Announcement (TA) function.
7 When it is ON
During DAB reception, when the selected Service Component supports Road Traffic
Flashes and Transport Flashes, reception is not interrupted by RDS Traffic Announcement
(TA).
7 When it is OFF
Interruption is by the first received news flash from among RDS and DAB traffic
information broadcasts.
1. Press the FUNCTION button and select the DAB Priority Setting mode
(DAB Priority) in the Initial Setting Menu.
2. Switch the DAB Priority
Setting ON/OFF with the
5/∞
buttons.
2. Select the desired tuning step
with the
2/3 buttons.
1. Press the FUNCTION button and select the FM Tuning Step mode (FM
tuning step) in the Initial Setting Menu.