Pioneer DEH-P90DAB - Manual (Page 39)

Operating Announcements with the Function Menu
7 Switch Announcements ON/OFF
1. Select the Announcement Support mode (Announcement Support) in the
Function Menu.
2. Select the desired Announcement Support in the following order:
News Flash (News)
Ô Weather Flash (Weather) Ô Announce (Announce)
3. Switch the selected Announcement Support ON/OFF.
Note:
• When “NEWS”, “WTHR” or “ANNC” is displayed, it indicates that Announcement Support is pro-
vided by the current Service Component.
• When the initial of each Announcement indicator is displayed, it indicates that you have selected
the Announcement Support. (e.g. “N” in “NEWS”.)
• When “
2” is displayed on the right side of indicator, it indicates that Announcement corresponding
to the Announcement Support you have selected is supported by the current Service Component.
• When “Announce” is ON, “Warning/Service”, “Event Announcement”, “Special Event”,
“Finance”, “Sports” and “Information” are also switched ON.
Switching Interrupting Announcements
When there are multiple Announcements in standby waiting to interrupt, and you are
listening to an Announcement, you can switch between them in order.
• Switch to the next Announcement.
Each time you press the SOURCE/OFF button, you move to the next Announcement.
When there are no more Announcements, you return to the original one.
Each press changes the Announcement ...
38
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS