Pioneer DEH-P90DAB - Manual (Page 19)

18
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Band
DAB1
= DAB2 = DAB3
To enable this unit to memorize more Services, frequencies are stored in three
bands, 1, 2 and 3. (Frequencies (Ensemble) that can be received are the same for
1, 2 and 3.)
Note:
• When first switching to each of the bands, Auto Seek is performed for receivable
Ensembles. (The starting frequency for Auto Seek in each band differs. For this reason,
when multiple frequencies are receivable, a different frequency is automatically received
in each band.)
DAB indicator
There’s a “DAB” indicator in the display. This indicates DAB
reception is possible.
Note:
• If there’s no sound even when “DAB” is lit, switch Services. The Service you were
listening to may have ended.
7 When listening to DAB
Lights during Ensemble reception.
7 When listening to a non-DAB source
Lights when in an area where DAB reception is possible.
Selecting the Ensemble or Service
When you first switch to DAB, Auto Seek is performed to find a DAB
Ensemble.
(Auto Seek is also performed in the same way each time you switch bands.)
Once Ensemble is received, Auto Seek ends.
Select a desired Service 0.5 seconds or less
Tune to a high or low frequency (Ensemble) 0.5 seconds or more*
* By pressing the same button, search stops and the unit switches to standby for recep-
tion of that Ensemble frequency.