Pioneer DEH-P90DAB - Manual (Page 56)

55
Audio Adjustment
Loudness Adjustment (Loudn
E
ss)
The Loudness function compensates for deficiencies in the low and high sound ranges at
low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (Loudn
E
ss) in the
Audio Menu.
Subwoofer Output (Sub W-1)
When a Subwoofer is connected, switch Subwoofer output ON.
Initially, Subwoofer output is OFF.
The Subwoofer output phase can be switched between normal, or 0˚ (“Phase:NOR”), and
reverse, or 180˚(“Phase:REV”). 0˚ is the default phase.
Note:
• When the Subwoofer Controller setting is “Sub woofer control External”, you cannot switch the
Subwoofer ON/OFF mode. In this case, this setting is not necessary. (Refer to page 66.)
• Select the OFF setting when you do not want the Subwoofer to operate.
3. Change the phase of
Subwoofer output with the
2/3 buttons.
2. Switch the Subwoofer output
ON/OFF with the
5/∞ but-
tons.
1. Press the AUDIO button and select the Subwoofer ON/OFF mode
(Sub W-1) in the Audio Menu.
3. Select the desired level with the
2/3 buttons.
Low (low)
+ = Mid (mid)
+ = High (high)
2. Switch the Loudness function
ON/OFF with the
5/∞ but-
tons.