Setting the rear output and subwoofer, Controller, Switching the sound muting/attenuation – Pioneer DEH-P700BT User Manual
Page 50: Switching the ever scroll, Multi language display setting, Setting the rear output and subwoofer controller, Initial settings
Setting the rear output and
subwoofer controller
This unit
’s rear output (rear speaker leads out-
put) can be used for full-range speaker (
FULL)
or subwoofer (
SUB W) connection. If you
switch the rear output setting to
SUB W, you
can connect a rear speaker lead directly to a
subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (
FULL).
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select REAR SP.
3
Press MULTI-CONTROL to switch the
rear output setting.
Pressing
MULTI-CONTROL will switch be-
tween
FULL (full-range speaker) and SUB W
(subwoofer) and that status will be displayed.
# When no subwoofer is connected to the rear
output, select
FULL (full-range speaker).
# When a subwoofer is connected to the rear
output, select
SUB W (subwoofer).
Notes
! Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
46).
! If you change this setting, subwoofer output
in the audio menu return to the factory
settings.
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! The sound is muted or attenuated, MUTE
or
ATT ON are displayed and no audio ad-
justment is possible.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select TEL.
3
Press MULTI-CONTROL to switch the tel-
ephone muting/attenuation.
Pressing
MULTI-CONTROL will switch be-
tween
ATT (attenuation) and MUTE (muting)
and that status will be displayed.
Switching the ever scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select
EVERSCROLL.
3
Press MULTI-CONTROL to turn the ever
scroll on.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.
Multi language display setting
Text information such as title name, artist
name or comment can be recorded on a com-
pressed audio disc.
This unit can display them even if they are em-
bedded in a European language or Russian.
! If the embedded language and the selected
language setting are not the same, text in-
formation may not be displayed properly.
! Some characters may not be displayed
properly.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 48.
2
Use MULTI-CONTROL to select TITLE.
3
Press MULTI-CONTROL to select the de-
sired setting.
Pressing
MULTI-CONTROL will switch be-
tween
EURO (European language) and
RUSSIA (Russian language) and that status
will be displayed.
Initial Settings
En
50
Section
04