Pioneer DEH-P700BT - Manual (Page 38)

Assigning preset numbers
1 Press LIST to display DIAL PRESET (pre-
set number list).
Refer to Using the phone number list on page
35.
2 Turn MULTI-CONTROL to switch preset
numbers.
You can select preset number from
1 to 10.
# Press and hold DISP to scroll the phone num-
ber.
# If the phone number is already in the phone
book, the corresponding name is displayed.
In this case, press and hold
DISP to scroll the
name.
# You can also change the phone number by
pushing
MULTI-CONTROL up or down.
3 Press MULTI-CONTROL to select a preset
number that you want to assign a phone
number to.
4 Press and hold MULTI-CONTROL to dis-
play MEMORY.
Push
MULTI-CONTROL up or down to switch
MEMORY (memory) and DELETE (delete).
# If a phone number is already stored in the se-
lected preset number, the new phone number will
overwrite the old one.
# For details on deleting, refer to Deleting preset
numbers on this page.
5 Select MEMORY and then press
MULTI-CONTROL to display the phone
book.
6 Turn MULTI-CONTROL to select the first
letter of the name you are looking for.
# You can also perform the same operation by
pushing
MULTI-CONTROL up or down.
7 Press MULTI-CONTROL to display en-
tries.
The display shows the first three Phone Book
entries starting with that letter (e.g.
“Ben”,
“Brian” and “Burt” when “B” is selected).
8 Turn MULTI-CONTROL to select a phone
book entry you want to store in the preset
list.
# You can also perform the same operation by
pushing
MULTI-CONTROL up or down.
# You can scroll literal information by pressing
and holding
DISP.
9 Press MULTI-CONTROL to display the
phone number list of the selected entry.
# You can also display the phone number list of
the selected entry by pushing
MULTI-CONTROL
right.
# If several phone numbers are included in an
entry, select one by turning
MULTI-CONTROL.
# You can scroll literal information by pressing
and holding
DISP.
# If you want to go back and select another
entry, push
MULTI-CONTROL left.
10 Press MULTI-CONTROL to store the
phone number in the preset list.
Deleting preset numbers
1 Press LIST to display DIAL PRESET (pre-
set number list).
Refer to Using the phone number list on page
35.
2 Turn MULTI-CONTROL to switch preset
numbers.
# Press and hold DISP to scroll the phone num-
ber.
# If the phone number is already in the phone
book, the corresponding name is displayed.
In this case, press and hold
DISP to scroll the
name.
# You can also change the preset phone num-
ber by pushing
MULTI-CONTROL up or down.
3 Press MULTI-CONTROL to select a preset
phone number that you want to delete.
4 Press and hold MULTI-CONTROL to dis-
play MEMORY.
Push
MULTI-CONTROL up or down to switch
MEMORY (memory) and DELETE (delete).
# About assigning , Assigning preset numbers
on this page.
Operating this unit
En
38
Section
02