Pioneer DEH-P700BT - Manual (Page 24)

Function and operation
REPEAT, RANDOM, SCAN, PAUSE and
S. RTRV operations are basically the same as
that of the built-in CD player.
Function name Operation
REPEAT
Refer to Selecting a repeat play
range on page 21.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the USB por-
table audio player/USB memory
are:
! TRACK – Repeat just the cur-
rent file
! FOLDER – Repeat the current
folder
! ALL – Repeat all files
RANDOM
Refer to Playing tracks in random
order on page 21.
SCAN
Refer to Scanning folders and
tracks on page 21.
PAUSE
Refer to Pausing playback on page
22.
S. RTRV
Refer to Using Sound Retriever on
page 22.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the ordinary display, press
BAND/ESC.
! If you select another folder during repeat play,
the repeat play range changes to ALL.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to FOLDER.
! When FOLDER is selected, it is not possible to
play back a subfolder of that folder.
! After file or folder scanning is finished, nor-
mal playback of the files begins again.
Playing songs on iPod
For details about the supported iPod, refer to
iPod
® compatibility on page 7.
Basic Operations
% Fast forward or reverse
Push and hold
MULTI-CONTROL left or right.
% Select a track (chapter)
Push
MULTI-CONTROL left or right.
Notes
! When using an iPod, iPod Dock Connector to
USB Cable is required.
! Read the precautions for iPod on page 69.
! While iPod is connected to this unit, PIONEER
(or (check mark)) is displayed on the iPod.
! If an error message is displayed, refer to Error
messages on page 64.
! When the ignition switch is set to ACC or ON,
the iPod
’s battery is charged while the iPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
! Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
! The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Browsing for a song
Searching songs by category
Operations to control an iPod with this unit is
designed to be as close to the iPod as possible
to make operation and song search easy.
! Depending on the number of files in the
iPod, there may be a delay when displaying
a list.
! If the characters recorded on the iPod are
not compatible with this unit, those charac-
ters are not displayed.
1 Press LIST.
Operating this unit
En
24
Section
02