Before you start, Resetting the microprocessor, Output setting of the dvd player – Pioneer DEQ-P7000 User Manual

Page 4

Text mode
Original mode

Before You Start

Section

Resetting the microprocessor

The microprocessor must be reset under the
following conditions:
• Prior to using this unit for the first time after

installation.

• If the unit fails to operate properly.
• When strange or incorrect messages appear

on the display.

• To reset the microprocessor, press the
RESET button on the unit with a pen tip or
other pointed instrument.

Output setting of the DVD player

When connecting Pioneer DVD player such as
DVH-P7000R, make DIGITAL OUTPUT
(Setting for digital output) and OUTPUT
SELECTION (Setting digital and analog audio
output) as follows:

Function

Setting

DIGITAL OUTPUT

Dolby D/LPCM

OUTPUT SELECTION

48KHz

Refer to the DVD player manual for details on
how to make those settings.

Important

• Be sure to set the correct position. If not, no

audio can be outputted.